Wet Wood

How to Draw Moisture Out of Wood – Step-by-Step Guide

0 Shares
0
0
0
Gazebo Plans
Gazebo Plans

Image Source

Have you experienced a flood or similar accident and are now worried about how to draw moisture out of wood? First, you have to act quickly. That situation doesn’t mean that you have to throw your hardwood floor out of the house. You can still draw the moisture out of it. Wondering how? Read this guide to know more.

How to Draw Moisture Out of Wood?

The method for removing the moisture depends on the wood type you have. The methods vary depending on removing moistness from a wood floor, table, subfloor, or deck.

1. Wood Floors and Subfloors

Step 1: First, you have to remove as much standing water as possible. So, get a mop or wet-vacuum cleaner and clean your floors.

Step 2: After that, clean it with a towel or rag.

Step 3: Increase the temperature of your room to speed up the water evaporation.

Step 4: If necessary, use fans to circulate more air.

Step 5: Use a dehumidifier to draw all the moisture from the wood floor.

Cleaning Floor 202222243837

Image Source

2. Wood Decks

Step 1: Use a wet vacuum cleaner to get rid of standing water.

Step 2: Consider using a lead blower to draw moisture.

Step 3: You can also try taping the deck if you want to go refinishing.

Step 4: If you are in a hurry, apply a coat of baking powder to wet areas.

Step 5: Wipe the deck with a clean paper towel.

Step 6: Let the deck dry naturally with the outdoor breeze.

Cleaning A Deck 202222243141

Image Source

3. Wood Table

Step 1: If you have a water spill, act quickly and wipe it with a towel or clean cloth.

Step 2: Tables are easy to move, so move them outdoor if the weather is suitable or keep them in a well-ventilated room.

Step 3: Aim one or two fans at the table to speed up the procedure.

Step 4: Use baking soda to remove the remaining moisture. Spread a coat of baking soda and leave it for a while.

Step 5: Once you dry the table, apply olive oil and vinegar mixture on the table. Finally, wipe the table with vinegar dipped cloth.

Wood Table 20222224322

Image Source

4. Wooden Door

Step 1: Simply put fans pointing at your door to remove new spills.

Step 2: However, if you are dealing with water damages, you may need to remove the door and keep it in a well-heated room.

Step 3: Also, keep fans at both sides of the door to speed up the process.

Step 4: Once you dry the wooden door, paint it with a sealant to prevent moisture in the future.

Wood Door 20222224351 Image Source

How to Draw Moisture Out of Wood Using Different Products

Baking Soda 202222243736

Image Source

1. Cat Litter

Silica-based and even cement-based cat litter can draw moisture out of your wood. Spread a layer of it on the damaged area and give it some time. Silica-based cat litters will be easy to clean and have no risk of staining the wood.

2. Baking Soda

Baking soda is incredible when it comes to removing moisture from woods. It absorbs moisture as its chemical formula attracts water and sucks it up. To use baking soda, first, get rid of standing water using a vacuum cleaner and then place a layer of baking soda on it. Wait for more than 12 hours to see the results.

3. Diapers

That may seem like a weird option, but diapers are another commonly available and inexpensive source of Silica. When opposed to Cat Litter, they already come in packets. It can be poured over the wood or split apart and scattered over the wood item.

4. Moisture Absorbing Pads Made of Silica

Silica pads come in a packet that may lay over the moisture-damaged wood to assist draw the moisture out. That’s one of the best choices for removing water out of wood.

General Tips on How to Draw Moisture Out of Wood

Fan For Cleaning 202222243541

Image Source

1. Remove water-soaked flooring and furniture from wet wood floors. Set these items out in the sun for drying.

2. Empty vacuum cleaner if it fills up while cleaning the wet wood. Don’t stop the suctioning even there is no visible water. Vacuum cleaners can pull water from the pores and draw moisture out.

3. Use a scrub brush and scrub until you remove all dirt, debris, grease, oil, and other substances. Use a disinfecting cleaner to clean up the wood.

4. Clean the floor twice to avoid future damages or stains.

5. Keep a dehumidifier at the center and set its highest extraction setting.

6. Even turn the fans on at the highest speed. Open the windows for a natural breeze, only if it’s not raining.

7. Check underneath to ensure complete dry wood. You can also drill a hole into the ceiling below the wet floor to release the remaining water. However, you have to consult a professional before doing this.

8. Once the wood is visibly dry, check for mold and mildew. If you found one, remove it with a scrubbing. Mix washing soda and water to clean the mildew. Don’t forget to dry the wood after cleaning.

9. You can cause a moisture testing meter to check how much moisture is remaining. The drying process for woods can take weeks and you have to know where you are standing in this procedure.

10. Connect with professionals and ask them how to draw moisture out of wood in your case.

11. Keep the temperature of the room high even after completing the procedure.

Sometimes you can’t see water damage, and that’s a terrible situation. When you a flood or active leak, you can easily spot the wet wood. However, the invisible water spills can only be seen after they damage the floor with mold and mildew. So, always check the wood’s bottom for moisture.

The running water on your floor and moisture underneath can cause pathogens. They even cause other unhygienic contaminants that make everything dirty and unhealthy. The dampness provides nourishment to the mold, fungus, and rot. That’s why drying your wood is the best way to secure your floor and health. So, follow this guide on how to draw moisture out of wood, and you will be fine.

0 Shares
You May Also Like