How to Get Ink off Wood
Getting rid of ink of your wood items or furniture is an easy task. It is necessary though that you conduct an online research first and make sure that you gather all the materials needed in removing ink from your wood furniture.
If you search on the Internet today, you will notice that there are different guidelines and instructions on how to get ink off the wood. You have to be very careful when choosing a particular guideline since not all of them are effective.
In fact, some guidelines may even harm the quality of your wood furniture. The good news is, this article is written to ensure that you will not only be able to successfully get ink off wood, but you will also be able to preserve its beauty and quality.
The materials needed to get ink off wood is easy to find and at the same time affordable. There is no need for you to spend extra cash just to get rid of the ink. You can buy these items on the web or you can buy them at your local stores.
- Soap or dishwashing soap
- Warm water
- Alcohol or cleaning solvent such as acetone or mineral spirits
- Clean cloth or sponge
- Dull blade or knife
- Lacquer thinner
1) Scrub the finished wood
Image Credit: hunker.com
The first thing that you need to do is to scrub the finish of the wood. In order for you to do this, you need to mix an ounce of soap or dishwashing soap with warm water.
Using a scrubber or a sponge, you will then scrub the ink patch. Inks are easier to remove if they have not penetrated the wood finish. Inks that has not penetrated the finish are less likely to cause damage to your wood.
Make sure that you scrub gently and don’t use too much force as this can damage your wood finish.
2) Use a solvent solution
Image Credit: wikihow.com
If the ink is still on the wood, then it is time for you to use a solvent solution. You can use rubbing alcohol or acetone. It is advisable that you wear a mask or gloves while applying other cleaning solvents such as mineral spirits or strong alcohols. Always be careful when applying alcohol or solvent on the wood.
Check if the ink pigments were dissolved. It is advisable that you test the acetone or mineral spirits first before you rub and scrub it on your wood furniture. Keep in mind that there are solutions out there that can damage the quality of your wood finish.
3) Sand it with 120-grit sandpaper
Image Credit: onthehouse.com
You will then get your sandpaper. Of course, you will only do this if the ink pigment is still there even after you rub and scrub it with cleaning solvents. It is important that you only use those 120-grit sandpapers and try to avoid applying too much force. Bear in mind that sandpaper can also remove the wood finish and so you have to make sure that you are careful when doing this.
4) Apply lacquer thinner
Image Credit: wikihow.com
There are also individuals out there who are using stronger solvents such as lacquer thinner in order to get rid of ink off the wood. Again, you have to be very careful when applying strong solvents such as lacquer thinner since this can damage the wood finish. Apart from using lacquer thinner, it is also advisable that you use bleach.
5) Scrape the wood
Image Credit: woodgears.ca
You will then scrape the wood using a dull blade or knife. Use light pressure only and make sure that you don’t scrape too deep since this can damage the wood finish or surface.
6) Apply a single coat
Image Credit: diynetwork.com
After scraping or sanding the wood, then it is time for you to apply a new finish. Restore the beauty of your wood by applying a single coat of clear finish and original color. Let it dry and then sand it lightly. Apply a second coat if necessary.
Ink on wood can be very frustrating. It can ruin the overall beauty of your wood furniture or item. The good news is, these guidelines are very easy to follow and the materials are cheap.
Always remember to be very careful when getting rid of ink off. Make sure that you don’t damage the wood surface or its finish. Asking help from experts is also advisable to ensure that you are able to get rid of ink without damaging your wood items.