Diy Solid Dog House By Ryobi Nation

42 Dog House DIY Plans

Table of Contents Hide
  1. 1) Dog House With a Beautiful Porch
  2. 2) DIY Cute Dog House Made of Surplus Dining Table
  3. 3) Modern Dog House
  4. 4) Dog House with a Light by Modern Builds
  5. 5) Cartoonish Dog House
  6. 6) Rocky’s Tropical or Summer Dog House
  7. 7) Cute Geometric Dog House by Home Made Modern
  8. 8) Adorable Puppy Camper Dog House
  9. 9) Basic Dog House
  10. 10) Handyman Tips DIY Free Dog House Plan
  11. 11) Instructables Mobile Dog House
  12. 12) Cottage House Dog House Plan
  13. 13) Elegant Pallet Kennel with a Sun Deck
  14. 14) Traditional Dog House by Lowe’s
  15. 15) Dog House with a Spacious Rooftop Deck
  16. 16) Country Dog House Plan with Porch
  17. 17) A-Frame Simple Dog House Plan
  18. 18) Mansion Dog House Plan by Instructables
  19. 19) Stylish Mini Ranch Dog House Plan by Sunset
  20. 20) Insulated A-Frame Dog House by Instructables
  21. 21) Simple Dog House by BuildEazy
  22. 22) Step-by-step Dog House by Grit
  23. 23) Ferrocement Dog House
  24. 24) Dog Tree House by DIY Network
  25. 25) Simple Dog House by All About Dog Houses
  26. 26) Double Dog House by MOP
  27. 27) Dog House Under the Stairs by The Rodimels
  28. 28) Ranum Dog House Plan
  29. 29) Modern Dog House by DIY Network
  30. 30) Insulated Dog House by Ron Hazelton
  31. 31) Pagoda Style Dog House by DIY Network
  32. 32) Air Conditioned Dog House by Instructables
  33. 33) Dog House Built By Dad
  34. 34) Pallet Dog House by Easy Pallet Ideas
  35. 35) Cabin Dog House by DIY Network
  36. 36) Sled Dog House by Endurance Kennels
  37. 37) ​Puppy Whelping Design Dog House
  38. 38) DIY Solid Dog House by Ryobi Nation
  39. 39) Rouge Engineer Large Dog Bed Plan
  40. 40) Lucy’s Dog House by Wood Shop Diaries
  41. 41) Dog House with Porch by Kreg
  42. 42) DIY Beautiful Dog House Plan by MOP
  43. Conclusion

21) Simple Dog House by BuildEazy

Simple Dog House By Buildeazy

The measurements of this project are given in standard measurement (ft and inches) and metric measurement (mm) with the standard measurements given first in brackets. This dog house stands 34 inches or 850mm high, it’s 32 inches wide, and 48 inches long,  accommodating a large dog. It is also suitable for smaller dogs.

It is constructed out of 1 x 6 inches boards for the floor and 2 x 2 inches lumber for the roof framing and skids. The walls measure 3/8″ inch thick using exterior type plywood. If you will use a dressed lumber (smooth) for the frame, the finished size of the wood will be less than the measurement given above. For instance, a 2 by 2 inches wood when dressed will become 1 ½ x 1 ½ inches. If you have a dog that loves to chew things, choose a wood that’s untreated without toxic preservatives.

Helpful Link:

22) Step-by-step Dog House by Grit

Step By Step Dog House By Grit

This is a basic dog house that is simple to build. The size just fit a full-grown dog that is not too big so your dog can generate enough heat from his body to keep him warm on very cold days. It has a good airflow with proper venting, keeping your pet from overheating. Proper ventilation avoids the formation of mold. This dog house is built off the ground, keeping your dog out of contact with a damp soil. It prevents the wood from rotting, thus extending the life of the dog house.

It is made to make your furry friend safe from the elements. It prevents water, rain, and wind from entering. There are overhangs for vents and doorways, and tight seams all around. You can use dog-friendly materials using untreated plywood and softwood, instead of pressure-treated wood. It’s a great dog house for your favorite pet which is comfortable.

Helpful Link:

23) Ferrocement Dog House

Ferrocement Dog House

Ferrocement is a very strong and inexpensive material that was used in constructing this dog house.  In this doghouse, your furry friend will be safe from rains, tornadoes, hurricanes, earthquakes, hails, and even nuclear detonations. It can be assembled in a dense wire mesh in your desired shape. The surface can be curved in two planes, an egg or a sphere.

Excess concrete falls through the mesh inside, so you’ll need to scoop it occasionally, using it on the outside. When the wire mesh is filled and covered completely, the next step is to smooth the outside and inside surfaces so that the concrete layer is less than 1 inch thick all over. Applying all the concrete in one session can be done, to prevent a weak seam between new applications. Keep it for a week by covering it with plastic up to 28 days for maximum strength.

Helpful Link:

24) Dog Tree House by DIY Network

Dog Tree House By Diy Network

Do you love a tree house? If you currently have a large dog, he might not like being high off of the ground. Because this tree dog house has a ramp, he might love a higher look out from the tree point. Even if you have smaller dogs, they also love being on a treetop or as high up as possible. Your little dogs are like cats because of the way they sleep on their backs of the couches and they will probably love this tree dog house too. If you have trees all over the place, making a tree dog house is a good idea. It offers a very relaxing place for your furry friend. By following the plan, you can create a sturdy dog house with a comfortable place to stay. Check the link below to find out how to build this dog house.

Helpful Link:

25) Simple Dog House by All About Dog Houses

Simple Dog House By All About Dog Houses

This is an insulated dog house that is made from recycled and inexpensive building materials. This dog house features an insulated roof, walls, and floor. It has a removable roof for easy cleaning, an inner wall, a deck with a roof, and a solid construction throughout. The materials used include recycled cedar boards, exterior grade plywood, and pine framing lumber. It cost about $150 or less.

This dog house was built as a gift. The doorway measures 11 inches wide and 15 inches high. The measurement of the front deck is 18 by 26 inches.  It weighs 100 pounds. It is consists of 6 insulated panels. The roof and side panels are made from 2 by 3 inches framing lumber. You can use a 1-inch foam sheeting for insulation. Cedar is used for the deck, the roof cap, the floor frame, and trim boards salvaged from 5/4 inch decking material.

Helpful Link:

26) Double Dog House by MOP

Double Dog House By Mop 2

This is a step-by-step DIY free dog house woodworking project that is about building double dog house plans. This building a spacious dog house for your furry friend. It is considered a complex project requiring proper planning. Choose the woodworking plans with detailed instructions to suit your budget and your pet size. It is important to plan every aspect of this project from the start, keeping the costs under full control.

Build a sturdy frame that can support two pets. You can adjust the size of the components with using a circular saw before you lock them together using galvanized screws. Plumbing the sides of this dog house with a spirit level is recommended, making sure the floor frame is horizontal. Select the right location for your dog house prior to thinking of the finishing touches. Your dog will definitely love this double door dog house, a safe and comfortable place for him to sleep and stay warm.

Helpful Link:

27) Dog House Under the Stairs by The Rodimels

Dog House Under The Stairs By The Rodimels

If you have a staircase, you can actually build a room for your pet.  Yes, you got it right, you can create a spacious in-wall dog house for your dog. Just a reminder, if you are planning to do this kind of construction involving cutting out studs in the walls, it is important to make sure that you reinforce them so your that your house does not fall down.

The tools and materials you will need include a drywall saw, a reciprocating saw, paneling or drywall, hacksaw, drill, door trim, drywall screws, quarter round, and floor of some sort. The most important part of constructing this dog house is to choose the gate or door. It is better to cut fewer studs. The gate used to make this dog house is perfect. If you’ll be using this gate, work out the attached wood part into your door.

Helpful Link:

28) Ranum Dog House Plan

Ranum Dog House Plan

This dog house plan is a fun and exciting project! The foundation of this dog house plan is made of pressure-treated 4 by 6 inches lag that is screwed together with 2 by 4 cross-members. The notches are cut at the end, allowing moisture to escape. To ensure that the dog house will last a long time, the builder painted two coats of creosote to seal the foundation.

The trusses were built easy. You just have to think about the amount of overhang for the eaves, the roof angle, and the ridge-board length, then computes carefully. The trusses have cut notches for support, resting on the top boards and centered over the studs. The builder painted the inside of the dog house black. Your dog will surely love this dog house plan, a comfortable place for him to stay warm in winter days, and cool during summertime.

Helpful Link:

29) Modern Dog House by DIY Network

Modern Dog House By Diy Network

This is a modern dog house that your dog will definitely love. To build this dog house, you need to first cut the subfloor and floor using ¾ inch plywood with the use of a circular saw. Use a template for drawing the curves so you can get the corners right, or you can use a compass to hammer the nail into the floor center then attach a string tied to the pencil and the nail. You can affix the upper floor to the subfloor with the use of screws and wood glue.

For the walls, use a jigsaw and cut a door made of flexible plywood or lean on one end. Cut the pieces to assure they are accurate when they are lined up. After which, attach the wood posts to the walls. Drill holes before you attach to avoid splitting and use wood screws and glue as needed.

Helpful Link:

30) Insulated Dog House by Ron Hazelton

Insulated Dog House By Ron Hazelton 2

To build this insulated dog house, it is important to size the parts, making the width equal to the length of the dog plus 12 inches. The length is equal the dog’s length and adds 18 inches. The next step is to secure the floor panel to the dog house base. Cut the floor panel to fit from ¾ inch-plywood, securing it to the base using weather-resistant screws.

You need to roof angle the sides in order to keep your dog dry. For cutting identical angles, you need to attach the side pieces first using a double-sided tape temporarily. Next, clamp a straightedge at the desired angle to the sides using a saber or circular saw. Each side is secured to the base using weather-resistant screws. The next steps include adding corner braces, installing a partition wall, insulating walls to keep your dog warm, and adding a roof.

Helpful Link: