31) Pagoda Style Dog House by DIY Network
When building this plan, you need to first cut the plywood according to your desired dimension and then the walls are assembled. The dimensions for this plan include 2 at 18 by 16 inches for the front and back walls, 2 at 18 by 24 inches for the side walls, 1 at 16 by 24 inches for the floor, and 4 at 1 x 1 x 18 inches for the corner cleats.
Next, you need to cut out the door. Assemble the walls with the corner cleats with the use of pneumatic pin nailer. You have to nail through the walls into the corner cleats covered by the decorative trim to give you a basic box shape, and leaving the floor last for easier assembly. The dimensions of the frame measure 18 by 24 inches with a strut that sit 4 inches from the top of the rail.
Helpful Link:
https://www.diynetwork.com/how-to/outdoors/structures/how-to-build-a-pagoda-style-doghouse
32) Air Conditioned Dog House by Instructables
Are you living in a very hot weather? Of course, your dog deserves a comfortable place to live in during summertime or extremely hot weather. This is the perfect dog house if you have a hot weather. It was built for two fragile dogs as a comfortable and safe haven for bigger dogs, featuring an air conditioner, electrical outlet, conduit electrical, access doors, stilt foundation, door, and window. This dog house was built using rough construction methods but it is durable.
The first step involves designing the dog house intended for small dogs. This dog house allows the dog owner to get inside to perform maintenance like changing the filter, arranging dog beds, and clean up. This dog house cost is worth $300 which includes the air conditioner. Surely, your dog would love staying cool inside this dog house when it is freaking hot. It’s a lovely dog house!
Helpful Link:
https://www.instructables.com/id/How-to-build-a-dog-house-w-air-conditioning/
33) Dog House Built By Dad
Do you have a staircase at home? Is your dog sleeping anywhere? This is a dog house built by a dad. It was a dog house built under the stairs for their dog. The first part of the construction involves cutting a hole. The initial hole is large between the two studs, without letting showing the stringers. The name of the dog is Jack. Their dog usually sleeps under anything. The family wants to give jack a secure and comfortable place to stay.
If you want to build a dog house under the staircase, this is a good dog house plan to start with. Anyway, the hollow part of your staircase can be a safe haven for your dog instead of sleeping anywhere around the house. Your dog will surely love it like Jack! Check the helpful link below to find out what you’re missing!
Helpful Link:
34) Pallet Dog House by Easy Pallet Ideas
Are you thinking of building a dog house? Building a dog house is a fun and challenging experience at the same time. You can keep your pet comfortable and enjoyable with a fun experience. Check this DIY pallet amazing dog house tutorial, getting full instructions to build a very beautiful dog house. It comes with a chevron roof that is capable of 3 different breeds of dog beds. This dog plan includes step-by-step pictures showing the construction plan. We have included a video to help you build a dog house using simple tools and materials as additional reference.
The materials and supplies you need include pallets, pallet breaker, hand-hammer, pry bar, measuring table, handsaw or circular saw, nails, claw hammer or nail gun, wood glue, and electrical orbital sander or sandpaper. Now, you can make a comfortable dog house for your favorite pet! Surely, your dog will love this dog house!
Helpful Link:
https://www.easypalletideas.com/pallet-dog-house/
35) Cabin Dog House by DIY Network
This cabin dog house involves cutting and notching the timbers, 42 inches long for the side walls and back (32 pieces), 14 inches long for the front (20 pieces), and 60 inches long (2 pieces) for the top side to hold the front porch. Use a table saw to run the timbers through creating 3 inches wide in a uniform thickness. Next, you need to flatten the inner sides, the bottom, and the top pieces so they easily fit together. The outside surface may remain curved. The next step involves cutting the notches into the 42-inch timbers for the lap joints.
When building the walls, start to place the logs one level at a time and apply an adhesive between each row. Do not forget the 10-inch pieces to go in the front and to make up for the dog house doorway. Check the complete plan and instructions by clicking the helpful link below.
Helpful Link:
https://www.diynetwork.com/how-to/outdoors/structures/how-to-build-a-log-cabin-doghouse
36) Sled Dog House by Endurance Kennels
If you want an original square style sled dog house, you can make out of a single sheet of plywood. Straw is considered the safest insulation because it is warm enough for Eurohounds or short-haired companions. During winter, clean the old straw from barrels. Pack the house full of fresh straw every 3 weeks. If the temperature is colder than 20 degrees Fahrenheit, most especially at night, your dog can be loaded in a dog trailer to heat up to 70F degrees Fahrenheit. Add pine shavings to the bedding if you’re worried about the water leaking inside the dog house.
This type of dog house is easy to clean, low maintenance, no rotting, no painting, waterproof, and lasts longer. You can build a sled dog house for 45 minutes. The price is about $85 if you’ll use a new treated lumber. Your dog will surely love this dog house.
Helpful Link:
37) Puppy Whelping Design Dog House
The Puppy Whelping Design Dog House has a similar concept with one sheet plywood design. It is supported by 2 by 2 inches across the plywood’s inner top side support. You can also use a ¾ inch plywood for the floor an the roof because some dogs are naughty chewers. It is good to build a dog house that is off the ground where the legs can extend just a little bit. You may also want to have it low instead so your puppy can explore finding his way back in.
Do you want a nice place for your puppy to stay? Try adopting this dog house plan today and challenge your workmanship. The Puppy Whelping Design Dog House includes a detailed plan and informative video. Surely, you’ll find building this dog house easy to build and your puppy will surely love it. Click the helpful link below to get into the details!
Helpful Link:
https://www.endurancekennels.com/how-to-build-a-sled-dog-house-video/puppy-whelping/
38) DIY Solid Dog House by Ryobi Nation
In this dog house project, you will learn how to build a beautiful dog house with a metal roof and a wood siding. It can fit medium-sized and bigger dogs. First, you need to build a platform and then build a frame. The next steps include adding a roof, side walls, and deck. It is a small scale project that has a building block for building enclosed structures.
The roof is made of metal and the builder also recommends shingles since metal is sharp. You can use a J channel like what the builder did around the two sides and the front part, covering the sharp ends. The panel is slid from the back and the channel was attached on top using screws. In this project, you’ll find all the details on the PDF link below. You’ll be impressed on how the plan is presented, and your dog will surely love the final outcome.
Helpful Link:
https://www.ryobitools.com/nation/how-tos/diy-dog-house
39) Rouge Engineer Large Dog Bed Plan
This is a dog bed plan that can be incorporated into a dog house. It is a good idea having a bed plan with a removable and detachable roof for a nice-looking dog house. To build the dog bed, you will need the following tools: drill, pocket hole jig, brad nailer, miter saw, pencil, tape measure, hearing protection, and safety glasses. The materials you will need include plywood, pocket hole screws, brad nails, wood glue, and optional handle and hinges.
This is a comfortable and simple dog bed that can match any interior or exterior décor of your home. The site provides all the details like the exact measurements and the photos of the final outcome of the project. If you want to convert it into a dog house, you can do so using additional materials. But of course, you’ll need to be mechanically inclined to do so, and you can share your very own DIY on this site too.
Helpful Link:
40) Lucy’s Dog House by Wood Shop Diaries
This dog house is obviously for a special dog. This is a dog house built for Lucy. The builder used a jigsaw, miter saw, table saw, nail gun, Kreg Pocket Hole Jig, and drill. This dog house was painted with the same color as the builder’s front door, navy blue. It appears like a mid-century modern dog house. A canopy and door trim was added, as well as a small dog toy box with scraps attached in front.
There is nothing fancy with this dog house but it is a very beautiful home. It is heavy and big, so expect that this is sturdy and durable. Lucy stays outside during summer and inside during winter. This dog house is insulated. A deck is a good place for your dog to enjoy outdoors. Like Lucy, your dog will surely love a personalized dog house specially made by you.
Helpful Link:
